Color Ink Jet Cartridge Refill?

I refilled the black and color cartridges on a hp photosmart 1000,


black and red section of cartridge works perfectly.. The yellow and blue are not putting out any color. Cleaned and primed at least 15 times.. What do I do next to get those colors flowing?|||If Priming hasn%26#039;t work, then there%26#039;s no other way out expect buying new one%26#039;s.


Here%26#039;s the best deal for you, visit http://www.Ask4Ink.com


They sell Good Quality at cheapest ever rates. You can%26#039;t get a better deal anywhere else.|||78a plus,take the cartridge out of the printer, boil some water, get a container large enough to put the cartridge in, take a paper towel fold it in half, get some isopropyl alcohol and a couple q tips, pour about a quarter of an inch of the boiled water into the container, dip the cartridge in and out of the water slowly 5-6 times, take the cartridge and dab it on the paper towel, always in a different spot so you can see the cartridge start to bleed better as it goes, you should get 3 solid color lines, now when you do, take a q tip dip it into the alcohol, turn the q tip sideways and gently rub the contact board on the back of the cartridge, the small electronic board, now let that sit for 10 minutes all that does is clean the contact and evaporate any water that got on the board, if you still have a problem repeat the process over again, but a lot of the bleeding starts by dabbing the cartridge on the paper towel, have fun good luck.|||If the jets are clogged with dried out ink, or paper residue, you may be out of luck. That is why most people that even promote refilling inkjet cartridges don%26#039;t recommend doing more than once or twice.